S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
- 11. Steering
   11.2. The block of an inflatable safety cushion on a steering wheel
   11.3. Steering wheel
   11.4. Steering trapeze
   11.5. Cuffs of hinges of a steering trapeze
   11.6. Power steering pump
   11.7. Disorder convergence installation
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes

b47c026d b47c026d

11.3. Steering wheel


1. Remove the block of an inflatable safety cushion.

Observe instructions according to the treatment of him.

2. Having unblocked the wheel lock, put wheels directly.
3. Block a wheel, having turned a little steering wheel, latch the lock.
4. For an adjustable column: completely drown a steering wheel.
5. Unscrew a bolt with a secret head (32с) a face key-shestigrannikom. Not to damage thus the wheel lock, the assistant should hold a steering wheel. Disconnect shtekkerny connections (38b) and (38с).
6. Remove a steering wheel from a shaft, if necessary bring down it a palm. The provision of a steering wheel concerning a shaft has serial marking.


1. Pass tips (38b) and (38с) through openings in a steering wheel.
2. Get a steering wheel so that shaft and wheel marking coincided.
3. Screw in new самоконтрящийся a bolt with a secret head and tighten it with the moment of 80 N of m, thus the assistant should hold a steering wheel.
4. Put the block of an inflatable safety cushion.
5. Make a trial trip and at movement on a straight line check the provision of a steering wheel. The upper edge of a cross-piece should stand horizontally.
6. In case there is an inclination, it is possible to displace on one tooth a nozzle on a shlitsa of a steering shaft.

If it is not enough this shift of a steering wheel, check a convergence of forward wheels.

7. Track the control indicator of the block of an inflatable safety cushion at complete turn of a steering wheel against the stop in both directions at the working engine, the control radiator should not light up.
8. Check a blinking light and shutdown of the index of turn after turn.

The dirty or sticky steering wheel can be cleared by means of a neutral household cleaner and slightly warm water. Do not apply when cleaning a wheel of abrasive powders or pastes.