S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
- 11. Steering
   11.2. The block of an inflatable safety cushion on a steering wheel
   11.3. Steering wheel
   11.4. Steering trapeze
   11.5. Cuffs of hinges of a steering trapeze
   11.6. Power steering pump
   11.7. Disorder convergence installation
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes

11.5. Cuffs of hinges of a steering trapeze

GENERAL INFORMATION

Defective cuffs should be replaced urgently since the dirt which has got into the hinge puts it out of action for a short time. In doubtful cases the tip of the lever or all steering trapeze assembled is replaced.

Removal

PERFORMANCE ORDER

1. Remove a steering trapeze.

2. Remove a flat spring ring (3) by means of a screw-driver.

3. Remove a cuff (2) together with a round spring ring (10) up.

4. Instruction: in case of a cuff of the ball hinge between draft and the lever of a trapeze arrive in the same way, but the lever tip before should be unscrewed.

Installation

PERFORMANCE ORDER

1. Remove greasing and fill the ball hinge about 3 ^cm3 of multi-purpose greasing, for example, Shell Retinax A.

2. Insert a new spring ring (10) round sections into a rubber cuff.

3. A rubber cuff (2) put on through a hinge pin.

4. A flat spring ring (3) put by means of a screw-driver with the rounded-off edges not to damage a rubber cuff.

5. Put into place a steering trapeze.