|
S-class W202 Mercedes1993-2000 of releaseRepair and car operation |
|
W202 Mercedes - 1.2. General information 1.3. Maintenance 1.4. Keys 1.5. Doors 1.6. Seats + 1.7. Safety systems + 1.8. Salon equipment - 1.9. Driving 1.9.2. Troganiye about places and gear shifting 1.9.3. Installation of the lever of a choice (DB) 1.9.4. Switch of a choice of a mode of movement (DB) 1.9.5. Traffic control 1.9.6. Cruise control 1.9.7. Consumption of oil and fuel 1.10. Engine cowl 1.11. Ventilation block, conditioner 1.12. Some councils upon car purchase 1.13. Changed numbers 1.14. Purchase of the old car 1.15. Durability of the car 1.16. About parallelism of bridges of the car and the trailer + 1.17. Preparation of the car for winter + 2. Maintenance + 3. Engines + 4. Greasing system + 5. Cooling system + 6. Heating, ventilation + 7. Ignition system + 8. Fuel system + 9. Transmission + 10. Running gear + 11. Steering + 12. Brake system + 13. Body + 14. Electric equipment + 14.2. Electroschemes |
1.9.2. Troganiye about places and gear shifting
Having got under way from a place check a brake. Quickly warm up the engine. After achievement of the necessary temperature of the engine check a steering. In order to avoid damage of a back axis, at a troganiye from a place on a slippery surface of the road completely avoid a long prokruchivaniye of driving wheels. Mechanical transmission Switching on a reverse gear is carried out at the standing car. For this purpose it is necessary to raise the switching lever. Do not exceed the most admissible speeds in separate transfers (see marking on a speedometer). Prevention Automatic transmission Separate transfers join automatically, depending on: – positions of the lever; Prevention Troganiye Establish the choice lever on desirable situation only in a single mode of the engine, задействуя thus a braking mode. At once at a troganiye release a brake, differently there is a danger that the car will get under way prematurely. Installation of a pedal of an accelerator It is not enough gas = earlier operation = insignificant dispersal. It is a lot of gas = late operation = strong dispersal. It is too much gas (the pedal of an accelerator is drowned below a point of full gas) = return switching on lower transfer = the maximum dispersal. |
|