S-class W202 Mercedes

1993-2000 of release

Repair and car operation


W202 Mercedes
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   + 2.5. Works on maintenance
   + 2.6. Care of the car
   2.7. Engine start from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes


b47c026d b47c026d strifor org, mibid mibor

2.10. The tools applied to maintenance
GENERAL INFORMATION


Costs of tool acquisition completely come true in volume of repair work which should be seen off on the Mercedes car. Besides the main equipment in any case we recommend to get a dinamometrichesky wrench. The good and reliable tool is offered by Hazet firm. Tools are given in the table with number of the order of Hazet firm.

No. on fig.
HAZET firm No. tool
1
Shock (pulse) винтоверт 2272
3
Screw-drivers for various screws 793/3
4
The stand for check of operation of the Bosch engine
5
Stroboscope for definition of the moment of ignition of Bosch 1)
6
Diode control lamp
7
Measuring lamellar щуп 0,05–1,0 mm 2147
8
Pincers for removal of coupling springs of brake shoes 797
9
Shock exhaust pincers for removal of maslootrazhatelny caps 791-2
10
Rotary core for capture of safety locks of system of injection 4519-1
11
Chain cutting torch of the final pipeline
12
Storage денсиметр with a pipette 802-1
13
Pneumatic adapter for replacement of maslootrazhatelny caps 3428
14
The hydraulic device for disembarkation of nuts 846-22
15
Key of the oil filter 2172
17
Set of face keys 2100/7R
18
Brush for cleaning of poles and clips of the storage battery 802-4
19
The holder for grinding in of valves 795
20
Magnetic hunter 1976
21
Dinamometrichesky wrench of 20-200 N of m 6122-1CT
22
Shaber for removal of the remains of consolidation on a head of the block of cylinders 824
23
File for a support of the disk wheel brake mechanism 1968-1
24
Шкворень traction coupling device, diameter of 15-19 mm 2173/1
25
Stripper of tips of cross-section steering draft 779
26
Pincers for isolation removal from wires 1862
27
Brass дорн
28
Brush from a steel wire for cleaning of a support of the disk wheel brake mechanism 1968
31
Shplintova a conducting element for safety pins of 748 Lgb-4
32
Shplintova a leading element for hollow pins 748-Lgb-6
33
Kompressometr
34
Square adapter with 1/2" on 1/4" 958-2
36
The device for boring of rasporny bolts 845
37
The two-way open closed wrench for cap nuts of the pipeline of a brake drive 612S 9 x 11

38
The two-way open closed wrench for extraction of contact safety locks of system of injection of fuel 6128 12 x 14
39
Shock stripper of levers of a screen wiper etc. 1966-5
is not present on fig.
Candle natural of directing 767 A Mgt-1

1) Only for petrol engines