The tank with brake liquid is located in a motor compartment. It is divided into two chambers, on one for each contour of a brake drive. The screw lock has a ventilating opening which should not be littered. The tank is transparent, so level of brake liquid can be checked at any time outside. Expediently through regular periods to look at a tank. Liquid level at the closed cover should be between "max" and "min" marks which have been squeezed out on tank.
Fill in brake liquid only the DOT 4 specifications.
Because of wear of brake disks there is an insignificant decrease in level of brake liquid. It is considered the normal phenomenon.
But if during short time level of brake liquid strongly decreases, it is a sign of its leak.
In this case it is necessary to find a leak place immediately. With a view of safety to check brake system follows in a specialized repair truck. |
