S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   + 2.5. Works on maintenance
   - 2.6. Care of the car
      2.6.2. Care of the painted surfaces
      2.6.3. Care of plastic details
      2.6.4. Care of glasses and rubber consolidations
      2.6.5. Care of light-alloy wheels
      2.6.6. Seat belts
      2.6.7. Anticorrosive protection
      2.6.8. Preservation of a motor compartment
      2.6.9. Care of an upholstery of chairs
   2.7. Engine start from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes

2.6.7. Anticorrosive protection

GENERAL INFORMATION

All system of the bottom of a body, including back wheel niches, for the purpose of protection against corrosion is covered with a polyvinylchloride layer. Especially strongly dangerous areas in a zone of rotation of forward wheels are protected against rubble hit by plastic covers. Besides, details of a body subject to corrosion are made from high-strength or of the zinced sheet metal. Before approach of a cold season and after a sink of the bottom of a body it is necessary to check its anticorrosive protection and if necessary to carry out additional preservation. In centrifugal area of the basis of a body the dust, clay and sand can отлагаться. Removal of the collected dirt which during winter time can be enriched is especially important also I will merge.