S-class W202 Mercedes

1993-2000 of release

Repair and car operation



W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1.2. Measuring devices
   14.1.3. Equipment of measurements
   14.1.4. Electric equipment checks
   14.1.5. Sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. Storage battery
   + 14.1.8. Generator
   + 14.1.9. Starter
   14.1.10. Traction relay
   + 14.1.11. Lighting system
   14.1.12. Devices
   14.1.13. Dashboard
   14.1.14. Filament lamps on the dashboard
   14.1.15. Light switch
   14.1.16. Radio receiver
   - 14.1.17. Aerial
      14.1.17.1. Telescope of the automatic aerial
   14.1.18. Loudspeakers
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Jets of a stekloomyvatel
   14.1.21. Washing nozzles of headlights
   14.1.22. Screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. "Galogenki"
+ 14.2. Electroschemes


b47c026d b47c026d

14.1.17. Aerial

GENERAL INFORMATION

77, 78. Bolts

79. Top part of consolidation

80. Lower part of consolidation

81. High-frequency wire

82. Electric socket

М11. Automatic aerial

Removal

PERFORMANCE ORDER
1. Disconnect from the plug of the storage battery a weight wire (–).
Prevention

The anticreeping code of radio is thus erased. Before a detachment of wires see subsection 14.1.7 recommendations.


2. Open a trunk lid, release spring clips and Take a lateral covering.
3. Unscrew a wire for connection with the case together with a bolt (77).
4. Unscrew the aerial below on the holder (78) and Take it from below from the rubber plug in a wing. Disconnect from plugs an antenna wire (81) and if is available, the line of management (82).

Installation

PERFORMANCE ORDER
1. Check the rubber plug in a wing on lack of porosity or damage, if necessary replace it.
2. Enter the aerial from below and insert its spherical head into the lower part of the plug.
3. Get the top part of the plug and fix it in the lower part.
4. Screw the aerial on the holder.
5. Screw on a body a wire for connection of the aerial with the car case.
6. Attach to the plug an antenna wire. In the presence of the aerial with remote control connect to the plug the electric line of management.
7. Get and fix spring clips a lateral covering.
8. Attach to the plug of the storage battery a weight wire (–). Establish time on hours and program an anticreeping code for radio.