S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      + 2.5.1. Engine and system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      - 2.5.3. Forward bridge / steering Check of hinges of the forward bridge Check of a free wheeling of a steering wheel Pulling up of fixing bolts on the steering mechanism Check of level of oil
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Engine start from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes

b47c026d b47c026d Check of level of oil

Check of level of oil in the steering mechanism with the amplifier

1. Unscrew a carving stopper and uncover a receiver.
2. Oil level, if oil cold (ambient temperature about +20 ° C) in a receiver should be between "min" and "max" marks.
3. If it is required, add oil for the steering mechanism of Mercedes-Benz N 000 989 88 03 firm.

Essentially add only new oil as the smallest pollution can already lead to emergence of malfunctions in work of hydraulic system.

4. Check on lack of porosity or damage a sealing ring on a cover.
5. Lay a cover for the case of the pump and fix it a carving stopper.
6. Then at the working engine turn several times a steering wheel from an emphasis against the stop, thanks to it from system air is removed.

Check of level of oil (liquid for hydrosystems) in system of regulation of a road gleam / automatically blocked differential

1. Establish the car on an equal surface.
2. Check oil level at the stopped engine.
2а. Open a cover and extend it together with the index of level of oil (2а).
2б. Wipe this index a bezvorsisty rag and again insert it against the stop on a former place.
2в. Extend a masloizmeritelny core and consider oil level. It should be between "min" and "max" marks.
3. If it is necessary to add liquid for hydrosystems, apply a pure funnel (60) and a close-meshed sieve.

It is possible to apply only the liquids resolved by plant to hydrosystems, for example, Mercedes-000 989 91 03/10.