The demanded special tool: – an opravka of face wrenches for spark plugs, for example, HAZET 2776.
The following quickly wearing out details should be bought:
– 4 or 6 corresponding spark plugs.
| PERFORMANCE ORDER |
|
1. Remove spark plugs. |
|
2. Measure shchupy gap size between electrodes (2). Preset value: 0,8 mm. At new spark plugs, as a rule, the gap between electrodes is adjusted correctly. |
| 3. For gap regulation between contacts turn in a lateral electrode (1). For this purpose there is a simple, practical tool (3), at its absence knock with a hammer sideways in the direction of a lateral electrode. |
| 4. When bending support a small screw-driver a fillet of a carving of a candle, at all on the central electrode (4), differently this electrode is damaged. |
| 5. Establish spark plugs. |
|
|
