S-class W202 Mercedes

1993-2000 of release

Repair and car operation



W202 Mercedes
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      - 2.5.1. Engine and system of production of exhaust gases
         + 2.5.1.1. Replacement of engine oil
         2.5.1.2. Check of a condition of a maple belt
         2.5.1.3. Replacement of spark plugs
         2.5.1.4. Check of electric connections
         2.5.1.5. Greasing of a control system of a butterfly valve
         + 2.5.1.6. Check of level of cooling liquid
         2.5.1.7. Conditioner: check of level of a coolant
         2.5.1.8. Replacement of the fuel filter / filter of rough cleaning
         2.5.1.9. Replacement of a replaceable element of the vozdushky filter
         2.5.1.10. Check of system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Forward bridge / steering
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Engine start from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes








b47c026d b47c026d


2.5.1.9. Replacement of a replaceable element of the vozdushky filter

GENERAL INFORMATION

For replacement it is not required any special tool.

It is necessary to buy the following quickly wearing out detail:

 – replaceable element of the air filter. Upon its purchase pay attention to compliance of engine capacity.
PERFORMANCE ORDER
1. Uncover the air filter. For this purpose open high-speed locks (shooters).
2. Take filtering element. Thus take filtering element for paper folds without the punched leaf. Do not apply any tool.
3. Wipe the filter case a rag.
4. Insert a new filtering element into the case of the air filter. Sealing rubber should adjoin densely from all directions.
5. Check consolidation on a cover of the air filter on absence of damages, if necessary – replace.
6. Get a cover and latch high-speed locks.