S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1.2. Measuring devices
   14.1.3. Equipment of measurements
   14.1.4. Electric equipment checks
   14.1.5. Sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. Storage battery
   + 14.1.8. Generator
   + 14.1.9. Starter
   14.1.10. Traction relay
   - 14.1.11. Lighting system Lamps of passing, driving and antifog beam A lamp in a forward lamp of the index of turn A lamp in a back lamp A lamp in a lamp of illumination of registration plate A plafond in salon Lamp of the index of turn
      + Headlight Back lamp
   14.1.12. Devices
   14.1.13. Dashboard
   14.1.14. Filament lamps on the dashboard
   14.1.15. Light switch
   14.1.16. Radio receiver
   + 14.1.17. Aerial
   14.1.18. Loudspeakers
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Jets of a stekloomyvatel
   14.1.21. Washing nozzles of headlights
   14.1.22. Screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. "Galogenki"
+ 14.2. Electroschemes

b47c026d b47c026d Lamps of passing, driving and antifog beam


1. Barrier бюгель (collar)
2. Case cover
3. The tip for a passing beam
4. The tip for a driving beam
5. Boss of a lamp of lay fire
6. The tip for anticreeping light
7. Filament lamp of a passing beam
8. Filament lamp of a driving beam
9. Filament lamp of a parking light
10. Filament lamp of antifog light
11. A clip for a lamp of a passing beam
12. A clip for a lamp of a driving beam
13. A clip for a lamp of antifog light


Switch off the switch of the corresponding lamp.

1. Open an engine cowl.
2. Cast away outside a wire bracket (1) and remove cases (2).
3. Remove the shtekkerny socket from the corresponding lamp.
4. Lamps of passing, driving and antifog beam: unhook clips and take a lamp. Insert a new lamp so that ledges entered into the corresponding cuts in the case. A lamp for a fog light insert together with a wire going to the car.
5. Parking light (front position lamp): remove the lamp holder together with the filament lamp. Take a lamp from the holder and replace it. At insertion fix the lamp holder.
6. Get a protective casing and fix supporting bracket.