S-class W202 Mercedes

1993-2000 of release

Repair and car operation



W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1.2. Measuring devices
   14.1.3. Equipment of measurements
   14.1.4. Electric equipment checks
   14.1.5. Sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. Storage battery
   + 14.1.8. Generator
   + 14.1.9. Starter
   14.1.10. Traction relay
   - 14.1.11. Lighting system
      14.1.11.1. Lamps of passing, driving and antifog beam
      14.1.11.2. A lamp in a forward lamp of the index of turn
      14.1.11.3. A lamp in a back lamp
      14.1.11.4. A lamp in a lamp of illumination of registration plate
      14.1.11.5. A plafond in salon
      14.1.11.6. Lamp of the index of turn
      + 14.1.11.7. Headlight
      14.1.11.8. Back lamp
   14.1.12. Devices
   14.1.13. Dashboard
   14.1.14. Filament lamps on the dashboard
   14.1.15. Light switch
   14.1.16. Radio receiver
   + 14.1.17. Aerial
   14.1.18. Loudspeakers
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Jets of a stekloomyvatel
   14.1.21. Washing nozzles of headlights
   14.1.22. Screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. "Galogenki"
+ 14.2. Electroschemes








b47c026d b47c026d


14.1.11.4. A lamp in a lamp of illumination of registration plate

PERFORMANCE ORDER
1. Unscrew two screws (46) on a lamp of illumination of registration plate (E19/1) and remove wires (47).
2. Extend a sofitny lamp from contact springs. If the lamp holder leaky enters into contact springs, in need of carefully them turn in.
3. Insert a new lamp.
4. Check on porosity or absence of damage consolidation, if necessary replace it.
5. Attach a lamp of illumination of registration plate, insert it and fix two screws, thus pay attention to normal landing of a sealant.