S-class W202 Mercedes

1993-2000 of release

Repair and car operation



W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1.2. Measuring devices
   14.1.3. Equipment of measurements
   14.1.4. Electric equipment checks
   14.1.5. Sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. Storage battery
   + 14.1.8. Generator
   + 14.1.9. Starter
   14.1.10. Traction relay
   - 14.1.11. Lighting system
      14.1.11.1. Lamps of passing, driving and antifog beam
      14.1.11.2. A lamp in a forward lamp of the index of turn
      14.1.11.3. A lamp in a back lamp
      14.1.11.4. A lamp in a lamp of illumination of registration plate
      14.1.11.5. A plafond in salon
      14.1.11.6. Lamp of the index of turn
      + 14.1.11.7. Headlight
      14.1.11.8. Back lamp
   14.1.12. Devices
   14.1.13. Dashboard
   14.1.14. Filament lamps on the dashboard
   14.1.15. Light switch
   14.1.16. Radio receiver
   + 14.1.17. Aerial
   14.1.18. Loudspeakers
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Jets of a stekloomyvatel
   14.1.21. Washing nozzles of headlights
   14.1.22. Screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. "Galogenki"
+ 14.2. Electroschemes








b47c026d b47c026d


14.1.11.8. Back lamp

Removal

PERFORMANCE ORDER
1. Take a floor covering from a luggage carrier.
2. Dismantle an internal upholstery around a back lamp.
3. Remove the shtekkerny socket below on the lamp holder.

Installation

40. Shtekkerny socket
41. Lamp holder
42. Nuts
43. Reflector
44. Lamp glass
45. Consolidation

PERFORMANCE ORDER
1. Check consolidation on lack of porosity and damages, if necessary replace it.
2. Insert glass of a back lamp together with consolidation outside into a body.
3. Press a reflector and evenly hardly tighten fixing nuts.
4. Insert the lamp holder and fix it, rotating to the right the plastic handle.
5. Get the tip on the socket.
6. Mount an internal upholstery.
7. Turn horizontally plastic handle on a back lamp and remove the lamp holder.
8. Unscrew fixing nuts (42).
9. Take outside glass of a back lamp (44) together with consolidation (43), a reflector remove inside.