S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      - 2.5.1. Engine and system of production of exhaust gases
         - Replacement of engine oil
   Plums of engine oil
   Visual control of leakage of oil
   Check of level of oil Check of a condition of a maple belt Replacement of spark plugs Check of electric connections Greasing of a control system of a butterfly valve
         + Check of level of cooling liquid Conditioner: check of level of a coolant Replacement of the fuel filter / filter of rough cleaning Replacement of a replaceable element of the vozdushky filter Check of system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Forward bridge / steering
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Engine start from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes

b47c026d b47c026d Visual control of leakage of oil

1. At the oiled engine at a high consumption of oil check, where oil follows.
1а. Open a cover of a maslonalivny opening and check consolidation on lack of porosity or damage.
1б. System of ventilation of a case: for example, a ventilating hose from a cover of a head of the block of cylinders to the butterfly valve case.
1в. Consolidation of a cover of a head of the block of cylinders.
1г. Consolidation of a head of the block of cylinders.
1д. Consolidation of the oil filter: cover of the oil filter.
1е. Carving stopper of a masloslivny opening (a sealing ring).
1ж. Consolidation of the oil pallet.
1з. Epiploons in front of and behind a distributive and cranked shaft.
2. As in the presence of thinnesses in most cases oil is distributed on rather big surface of the engine, at first sight, it is impossible to define leakage of oil. By search it is expedient to arrive as follows.
2а. Wash out the engine. For this purpose sprinkle the engine standard low-temperature detergenty and after short-term endurance wash out a water stream. Previously close the generator a plastic cap.
2б. Pollinate lime or a powder of talc of a place of separation and consolidation outside on the engine.
2в. Check oil level, if necessary add oil.
2г. Carry out a trial trip. As oil at the hot engine becomes liquid and thanks to it will appear in points of leaks rather, this trial trip it is necessary to carry out on a piece about 30 km on the high-speed highway.
2д. Then the engine survey a lighting lamp, localize a leaky place and eliminate defect.