S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      - 2.5.1. Engine and system of production of exhaust gases
         - Replacement of engine oil
   Plums of engine oil
   Visual control of leakage of oil
   Check of level of oil Check of a condition of a maple belt Replacement of spark plugs Check of electric connections Greasing of a control system of a butterfly valve
         + Check of level of cooling liquid Conditioner: check of level of a coolant Replacement of the fuel filter / filter of rough cleaning Replacement of a replaceable element of the vozdushky filter Check of system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Forward bridge / steering
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Engine start from the auxiliary accumulator
   2.8. Car towage
   2.9. Car lifting
   2.10. The tools applied to maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes

b47c026d b47c026d Check of level of oil



The engine should not spend some oil more than 1,0 l for 1000 km of run. The bigger expense is a sign of wear of maslootrazhatelny caps of cores of valves and / or piston rings or oil consolidations.

At measurement of level of oil the car should stand on a horizontal surface.

The engine should be heated-up to working temperature.

After a stop of the engine wait not less than 3 minutes in order that oil gathered in the oil pallet.

1. Extend the index of level of oil (1) and wipe it a pure rag.
2. Enter a measuring core against the stop into directing tube and again it extend. Level of oil should be between both marking marks.


Add new oil only if level of oil comes nearer to "min" mark. The oil volume from "min" to a mark of "max" makes about 2,0 l.

Oil is added in a lock (2) covers of a head of the block of cylinders. At a dolivka apply the corresponding grade of oil, do not apply oil additives.