S-class W202 Mercedes
1993-2000 of release
Repair and car operation
+ 1.2. General information
+ 2. Maintenance
- 3. Engines
3.1.2. Identification number
+ 3.1.3. Engine
3.1.4. Cars with the conditioner
3.1.5. Bottom cover of a motor compartment
3.1.6. Covers of cast openings
3.1.7. Natyazhitel of a chain
+ 3.1.8. Cover of a head of the block of cylinders
+ 3.1.9. Head of the block of cylinders
+ 3.1.10. Camshafts
3.1.11. Hydraulic tarelchaty pushers
3.1.12. Maslootrazhatelnye caps
3.1.14. Directing valves
3.1.15. Saddles of valves in a head of the block of cylinders
+ 3.1.17. Klinovy belt
3.1.18. Diagnostics of malfunctions (DB)
3.1.19. General comments
3.1.20. Repair work without engine dismantle
+ 3.1.21. Major maintenance of the engine
+ 3.2. Diesel engine (DD)
3.2.3. Cars with the conditioner
3.2.4. Bottom cover of a motor compartment
3.2.5. Covers of cast openings
3.2.6. Natyazhitel of a chain
+ 3.2.7. Camshaft
+ 3.2.8. Head of the block of cylinders
+ 3.2.9. Maslootrazhatelnye caps
3.2.10. Cover of a head of the block of cylinders (2,2/2,5 l)
3.2.11. Hydraulic tarelchaty pushers
3.2.13. Directing valves
3.2.14. Saddles of valves in a head of the block of cylinders
3.2.15. Head of the block of cylinders and motor block
3.2.17. Maple ridge belt
3.2.18. Tense device of a maple ridge belt
3.2.19. Diagnostics of malfunctions (DD)
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes
Without engine dismantle from the car it is possible to execute a set of the main operations on repair.
Before the beginning of any works it is very desirable to wash out a motor compartment and the engine a water stream. To work with the pure engine it is easier, pollution of the internal device of the engine is prevented.
To expand working space and not to damage coloring, uncover a motor compartment and hinged mudguards.
If traces of leaks of oil or the cooling liquid, indicating need of replacement of laying are observed, all works as a rule are carried out without engine dismantle. Without dismantle it is possible to replace laying of the oil pallet, a head of the block of cylinders, laying of inlet and final collectors, forward and back covers, an epiploon of a cranked shaft.
Without dismantle of the engine it is also possible to remove such hinged units as the pump of cooling liquid, a starter, the generator, the distributor of ignition, inlet and final collectors, and also the fuel pump and the carburetor.
As the head of the block of cylinders too can be removed without engine dismantle, repair of the klapanny mechanism is possible also.
Without dismantle it is possible to perform also such works as replacement or check of a condition of a gear belt, gear wheels of a drive of a cam-shaft, the oil pump, consolidation of a forward cover.
In extreme cases when there is no necessary equipment, without removal of the engine it is possible to replace piston rings, pistons, rods and shatunny loose leaves, отхоннинговать cylinders. However, to perform these works without removal of the engine it is not recommended, as cleaning of accompanying details and preparatory activities are required.