S-class W202 Mercedes

1993-2000 of release

Repair and car operation



W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
- 3. Engines
   3.1.2. Identification number
   + 3.1.3. Engine
   3.1.4. Cars with the conditioner
   3.1.5. Bottom cover of a motor compartment
   3.1.6. Covers of cast openings
   3.1.7. Natyazhitel of a chain
   + 3.1.8. Cover of a head of the block of cylinders
   + 3.1.9. Head of the block of cylinders
   + 3.1.10. Camshafts
   3.1.11. Hydraulic tarelchaty pushers
   3.1.12. Maslootrazhatelnye caps
   3.1.13. Valves
   3.1.14. Directing valves
   3.1.15. Saddles of valves in a head of the block of cylinders
   3.1.16. Compression
   + 3.1.17. Klinovy belt
   3.1.18. Diagnostics of malfunctions (DB)
   3.1.19. General comments
   3.1.20. Repair work without engine dismantle
   + 3.1.21. Major maintenance of the engine
   + 3.2. Diesel engine (DD)
   3.2.3. Cars with the conditioner
   3.2.4. Bottom cover of a motor compartment
   3.2.5. Covers of cast openings
   3.2.6. Natyazhitel of a chain
   + 3.2.7. Camshaft
   + 3.2.8. Head of the block of cylinders
   + 3.2.9. Maslootrazhatelnye caps
   3.2.10. Cover of a head of the block of cylinders (2,2/2,5 l)
   3.2.11. Hydraulic tarelchaty pushers
   3.2.12. Valves
   3.2.13. Directing valves
   3.2.14. Saddles of valves in a head of the block of cylinders
   3.2.15. Head of the block of cylinders and motor block
   3.2.16. Compression
   3.2.17. Maple ridge belt
   3.2.18. Tense device of a maple ridge belt
   3.2.19. Diagnostics of malfunctions (DD)
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes


b47c026d b47c026d

3.2.19. Diagnostics of malfunctions (DD)

GENERAL INFORMATION

If the engine is not started, it is necessary to localize malfunction. For rotation of the engine a number of conditions should be executed: lack of mistakes in driving; the fuel tank filled with fuel; normally working starter.

REASON
WAY OF ELIMINATION
Bad start of the engine or it is not started at all
Errors of management at start
Start of the cold engine Include ignition, the control lamp will not go out yet. At once after the control lamp will go out, start the engine.
Start of the engine, heated-up to working temperature Preliminary warming up it is not required, the engine is started at once.
Does not work the device of a preliminary warming up The control lamp of a preliminary warming up does not burn Check a control lamp, glow plugs and the relay of a preliminary warming up.
The lamp of a preliminary incandescence burns Switch off ignition. Disconnect 2 wires of candles of an incandescence for cylinders 2-4, include ignition; if the control lamp burns, check the relay of a preliminary warming up and replace in case of need.
The fuel system is faulty Fuel does not arrive Toplivoprovoda (hoses of absorption, a retsirkulyatsiya, injection) are bent, littered, are not tight. The fuel filter is littered.
The moment of the beginning of access of fuel is displaced Check the moment of the beginning of intake of fuel, adjust it.
The nozzle is faulty Check nozzles
The fuel pump is faulty All cylinders work at the same time Replace the fuel pump.
The starter rotates too slowly Charge the battery. Check an electric chain of a starter.
Too low compression Repair the engine.
Sealing laying of a head of the block of cylinders is faulty Replace laying.