S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13.10. Back window regulator
   13.11. Glass of a forward door
   13.12. Window regulator engine
   13.13. Perchatochny boxing
   13.14. Sheeting of the handle of gear shifting
   13.15. Forward ashtray
   13.16. Average console
   13.17. Panel of service of heating
   13.18. Internal covering of the A-rack
   13.19. Internal covering of the S-rack
   13.20. Forward seat
   13.21. Back seat
   + 13.22. Central lock
   13.23. External mirror / glass of a mirror
   13.24. A covering under the dashboard
   13.25. Front bumper
   13.26. Rear bumper
   13.27. Internal wing of the car
   13.28. Car wing
   13.29. Lattice Mercedes radiator / emblem
   13.30. Draft of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of supply of air for salon heating
   13.33. Catchment basin
   13.34. Paint and varnish covering
   13.35. Metal corrosion
   13.36. Automake-up
   13.37. What creaks?
   13.38. Hatch
+ 14. Electric equipment
+ 14.2. Electroschemes

13.10. Back window regulator

GENERAL INFORMATION

1. Window regulator
2. Polzun
3. Openings for fastening of secret rivets
4. Lock bracket
5. Window regulator tire
6. Lowered glass
7. Secret rivet of 4,8 mm

Removal

PERFORMANCE ORDER

1. Remove an internal covering of a door.

2. Carefully remove pressurizing film.

Prevention

The film is easily torn.

3. Disconnect a lock bracket from the window regulator tire.

4. Lowered glass with the tire of a window regulator take down from ползуна and move up in the window tire. Fix glass a plastic or wooden wedge that it did not drop out.

5. Window regulator приклепан. To Rassverlita four rivets drill of 4,8 mm. Track thus that the drill did not enter into an internal tin of a door. For a rivet special pincers are necessary for secret rivets.

6. Take a window regulator from below. The electric window regulator is taken together with the engine. Disconnect a wire of an electric window regulator.

Installation

PERFORMANCE ORDER

1. Insert a window regulator into a door and приклепайте pincers for secret rivets. If is not present at the disposal of pincers, the window regulator can be fixed screws and nuts. Before a vvinchivaniye to grease screws with a protective tool, for example, Loctite 270 or Omnifit.

2. Carefully lower glass and establish a lock bracket.

3. Connect electric wires.

4. Attach pressurizing film, having tracked, that there were no folds.

Prevention

Do not damage a film – it should be faultlessly tight.

5. Establish an internal covering of a door.