S-class W202 Mercedes

1993-2000 of release

Repair and car operation



W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13.10. Back window regulator
   13.11. Glass of a forward door
   13.12. Window regulator engine
   13.13. Perchatochny boxing
   13.14. Sheeting of the handle of gear shifting
   13.15. Forward ashtray
   13.16. Average console
   13.17. Panel of service of heating
   13.18. Internal covering of the A-rack
   13.19. Internal covering of the S-rack
   13.20. Forward seat
   13.21. Back seat
   + 13.22. Central lock
   13.23. External mirror / glass of a mirror
   13.24. A covering under the dashboard
   13.25. Front bumper
   13.26. Rear bumper
   13.27. Internal wing of the car
   13.28. Car wing
   13.29. Lattice Mercedes radiator / emblem
   13.30. Draft of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of supply of air for salon heating
   13.33. Catchment basin
   13.34. Paint and varnish covering
   13.35. Metal corrosion
   13.36. Automake-up
   13.37. What creaks?
   13.38. Hatch
+ 14. Electric equipment
+ 14.2. Electroschemes








b47c026d b47c026d


13.12. Window regulator engine

Removal

PERFORMANCE ORDER
1. Remove an internal covering of a door.
2. Carefully remove pressurizing film in the bottom area.
Prevention

The film is easily torn.


3. Disconnect the tip (2) from the window regulator engine.
4. Forward door: unscrew the engine of a window regulator (M10/3) with internal bolts (1) and remove.
5. Back door: dismantle a window regulator, see соотв. section. Then unscrew the engine of a window regulator (M10/5) with internal bolts (1) and remove.

Installation

PERFORMANCE ORDER
1. Before installation slightly grease with universal greasing an engine gear wheel.
2. Establish the engine and tighten bolts with the moment of 15 N of m.
3. Back door: establish a window regulator.
4. Put on the wire socket.
5. Attach pressurizing film without folds.
Prevention

Do not damage a film – it should provide faultless sealing.


6. Check window regulator functioning.
7. Establish an internal covering of a door.