S-class W202 Mercedes

1993-2000 of release

Repair and car operation



W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13.10. Back window regulator
   13.11. Glass of a forward door
   13.12. Window regulator engine
   13.13. Perchatochny boxing
   13.14. Sheeting of the handle of gear shifting
   13.15. Forward ashtray
   13.16. Average console
   13.17. Panel of service of heating
   13.18. Internal covering of the A-rack
   13.19. Internal covering of the S-rack
   13.20. Forward seat
   13.21. Back seat
   + 13.22. Central lock
   13.23. External mirror / glass of a mirror
   13.24. A covering under the dashboard
   13.25. Front bumper
   13.26. Rear bumper
   13.27. Internal wing of the car
   13.28. Car wing
   13.29. Lattice Mercedes radiator / emblem
   13.30. Draft of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of supply of air for salon heating
   13.33. Catchment basin
   13.34. Paint and varnish covering
   13.35. Metal corrosion
   13.36. Automake-up
   13.37. What creaks?
   13.38. Hatch
+ 14. Electric equipment
+ 14.2. Electroschemes








b47c026d b47c026d


13.33. Catchment basin

GENERAL INFORMATION

4. Catchment basin
5. Rubber support of screen wipers
6. Fastening bolt on the right
8. A hose for water plum
10. The channel for pipelines

4. Catchment basin
7. Clips of the device of access of air
9. Spillway
11. Average part of a partition
12. Collar
13. Bolt
14. Spring clip
15. A support of the operating device
16. Six-sided nut

Removal

PERFORMANCE ORDER
1. Remove a covering under a windscreen.
2. Remove the device of screen wipers.
3. Unscrew two rubber support (5).
4. Disconnect 4 clips (7), unscrew one bolt (6).
5. Disconnect the channel of wires (10).
6. Disconnect a collar (12) топливопроводов.
7. Unscrew 4 screws (13), wring out 2 spring clips and remove an average part of a partition (11).
Prevention

At installation of an average part of a partition on a former place to pay attention to a rubber tip for a bringing hose of heating.


8. Remove a support of a monitor (15) for what unscrew three nuts (16).
9. Take a catchment basin.
Prevention

At replacement of a catchment basin to watch the correct provision of a spillway and a drain hose.


Installation

Installation is made in sequence, return to removal.