S-class W202 Mercedes

1993-2000 of release

Repair and car operation

W202 Mercedes
+ 1.2. General information
+ 2. Maintenance
- 3. Engines
   3.1.2. Identification number
   + 3.1.3. Engine
   3.1.4. Cars with the conditioner
   3.1.5. Bottom cover of a motor compartment
   3.1.6. Covers of cast openings
   3.1.7. Natyazhitel of a chain
   + 3.1.8. Cover of a head of the block of cylinders
   + 3.1.9. Head of the block of cylinders
   + 3.1.10. Camshafts
   3.1.11. Hydraulic tarelchaty pushers
   3.1.12. Maslootrazhatelnye caps
   3.1.13. Valves
   3.1.14. Directing valves
   3.1.15. Saddles of valves in a head of the block of cylinders
   3.1.16. Compression
   + 3.1.17. Klinovy belt
   3.1.18. Diagnostics of malfunctions (DB)
   3.1.19. General comments
   3.1.20. Repair work without engine dismantle
   + 3.1.21. Major maintenance of the engine
   - 3.2. Diesel engine (DD)
      - 3.2.2. Engine
         3.2.2.2. Installation
         3.2.2.3. Engine ventilation
         3.2.2.4. Functioning
   3.2.3. Cars with the conditioner
   3.2.4. Bottom cover of a motor compartment
   3.2.5. Covers of cast openings
   3.2.6. Natyazhitel of a chain
   + 3.2.7. Camshaft
   + 3.2.8. Head of the block of cylinders
   + 3.2.9. Maslootrazhatelnye caps
   3.2.10. Cover of a head of the block of cylinders (2,2/2,5 l)
   3.2.11. Hydraulic tarelchaty pushers
   3.2.12. Valves
   3.2.13. Directing valves
   3.2.14. Saddles of valves in a head of the block of cylinders
   3.2.15. Head of the block of cylinders and motor block
   3.2.16. Compression
   3.2.17. Maple ridge belt
   3.2.18. Tense device of a maple ridge belt
   3.2.19. Diagnostics of malfunctions (DD)
+ 4. Greasing system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. Ignition system
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electroschemes

3.2.2.4. Functioning

GENERAL INFORMATION

126. Oil separator
127. Retsirkulyatsionny pipe
140. Distributive pipe
141. Valve of adjustment of pressure

and. Ventilating opening in diameter of 3 mm
A.Produvnye gases
Century. Fresh air

Hot gases direct through an oil separator (126) in a cover of a head of the block of cylinders and via the pipeline (140) in soaking-up branch pipes. In an oil separator (126) oil is filtered and flows through a retsirkulyatsionny pipe (127) back to a head of the block of cylinders.

The valve of adjustment of pressure in a cover of a head of the block of cylinders prevents emergence in the engine of too high depression.

For ventilation of space of a membrane in the valve of adjustment of pressure in a cover of a head of the block of cylinders the ventilating opening (shooter) is provided. It should not be littered with dirt or preservatives.