|
Elements of the central lock of lobbies and back doors are hung directly on locks of doors and fastened to them by screws. In adjustment of an operating core there is no need.
Door element
|
|
1. The screw (with a crosswise shliyets or a secret head)
2. An operating core |
3. Lock lever
14. Door lock
15. Element of the central lock |
Removal
| PERFORMANCE ORDER |
| 1. Remove the door lock. |
| 2. Unscrew the screw (1). |
| 3. Disconnect an operating core (2) from the lock lever (3). |
| 4. Disconnect an element (15) from the door lock. In case of need, check element functioning (work in repair shop). |
|
Installation
Installation is made in sequence, return to removal.
Element of a cover of a fuel tank
|
|
1. Covering
2. Fastening uvula
3. Element of the central lock |
4. Pneumatic pipeline
8. Holder
9. Bolts |
Removal
| PERFORMANCE ORDER |
| 1. Remove a covering of a luggage compartment (1). |
| 2. Wring out a pneumowire (4) 7 mm a key. |
| 3. Weaken bolts (9). |
| 4. Disconnect an element of a cover of a fuel tank (3) with the holder (8) from a basic strut. |
| 5. Press a uvula of fastening (2) and remove the holder (8). |
| 6. In case of need check element functioning (work in repair shop). |
|
Installation
Installation is made in sequence, return to removal.
|
